How to Make a DIY Christmas Tree Skirt – Simple Tutorial
Learn how to make a DIY Christmas tree skirt in just a few steps with this simple tutorial!
This year presented the opportunity to decorate a second tree in our home – something I’ve dreamed of doing for awhile. I realized, however, that it would need a tree skirt. Rather than run out and buy one I thought I would try my hand at a diy Christmas tree skirt made out of materials I already had in my stash.
The process is quite straightforward and your tree skirt can be as plain or fancy as you’d like. Mine is made from vintage linen purchased from a church rummage sale ($3 for a whole box of fabric!) as well as scraps of lace trim from my childhood. The larger lace was the trim to my beloved bed sheet which eventually got a big hole in it. I trimmed the lace off the edges and saved it for probably 15 years, awaiting a future project such as this. The smaller lace was a stash leftover from when my mom used to sew dresses for my dolls. All of these materials combined make it a very special tree skirt for me.
How to Make a DIY Christmas Tree Skirt
Supplies Needed for a DIY Christmas Tree Skirt
Fabric for the top
Amount varies based on desired size. (About 48 inches in diameter is a common medium sized skirt but you should measure and do what works for your space – see directions for how to measure.)
Quilt batting
Or other heavier fabric for the middle layer of the skirt – same amount as top fabric.
Bottom backing fabric
Just a neutral (or not) fabric for the bottom layer. Same amount needed as the other two fabrics.
Could pick something fun for a reversible tree skirt!
Trim, if desired
Lace, ruffles, rick rack, or other embellishments
Fabric scissors
Sewing pins
Measuring tape or yardstick
Sewing machine
Coordinating thread
Directions for a DIY Christmas Tree Skirt
Step 1: Measure for your tree skirt.
Decide what diameter your tree skirt should be and write this number down.
Decide what diameter the center hole should be (for the trunk) and write that number down.
Tree skirts vary greatly in size and depend on the size of the tree and the needs of your space. I made mine on the small side because the cabinet is right next to the tree, but generally a skirt should extend a few inches beyond the bottom set of branches.
Step 2: Prepare the top fabric
(Always iron your fabric first.)
Fold the fabric in quarters (half, then half again).
Find the center fold and mark with a pin.
Measure out from that point the radius (half the diameter) of your tree skirt + 1/2 inch for seam allowance.
Mark that point with a pin.
Continue measuring and marking from one side to the other in an arc shape, always measuring from the center fold.
Step 3: Cut the top fabric.
Cut along your arc shaped pin line from one side to another.
If you feel more comfortable drawing this out with fabric pencil first, do that.
Step 4: Measure and cut the center (trunk) hole.
Repeat steps 2 and 3, but this time for the center (trunk) hole.
This measurement will the be radius (half the diameter) of the center hole measurement you took earlier.
Step 5: Cut the side opening
Unfold your fabric – you should now have a nice circle with a circular center opening.
Cut up one side, just to the center hole, so that you have a slit to get the skirt around the tree.
Step 6: Cut identical pieces from the other fabrics.
Use the top fabric as a pattern to cut identical pieces from both the quilt batting and the bottom backing fabric.
Step 7: Sandwich the layers.
With right sides facing, place the top and bottom layers together. Place the quilt batting layer on top of the top layer.
Place any edge trim you are using in between the top layers. Be sure any ruffles are pointing inward.
Pin in place all around the edge, with 1/2 inch seam allowance.
Step 8: Sew around the edge.
Using a straight stitch on your machine, sew all the way around the edge of the skirt and up one slit. Leave the other side of the slit open for turning.
Step 9: Close up the skirt.
Turn the skirt right side out through the side slit opening. The top fabric and bottom fabric will be separated and the quilt batting will end up sandwiched in the middle.
Tuck under the edges of the side slit opening and sew it shut as close to the edge as possible.
Step 10: Finishing the skirt
Sew on any finishing embellishments such as this extra lace edging. I overlapped it with the larger lace and secured it with a simple straight stitch.
All done! Now wrap it around the base of your tree and enjoy!
I hope you found this tutorial helpful and that you enjoy making your own DIY Christmas tree skirt this season!
Blessings,
Melissa
