This post contains affiliate links for which I may earn a small commission on qualifying purchases. Please click here for more details. I truly appreciate your support!

As with any project, please use your own common sense and discretion. This tutorial is meant to offer helpful suggestions, but it is up to the reader to weigh any risk associated with this project.

What do I use to hang vintage dishes?

I’m glad you asked! I know some people use those adhesive disks which are supposed to be invisible (the kind where you wet the back and stick it to the back of the plate). I’ve never personally tried those, but they make me soooo nervous and I’ve heard too many stories of plates falling off of walls and shattering.

My favorite hanger, by far, is the Tripar wire plate hanger which securely grasps onto the plate and comes with a nail and picture hanging hook specifically for the plate hanger. They come in both white and brass – I like to use the white ones.

You will need to measure your dish before purchasing a plate hanger! They come in several size ranges – just check the measurement specification on the package for appropriate plate size. If you’re on the edge of a different size, go for tighter rather than looser. You never want the plate hanger to be loose on the plate. Also note the maximum weight each size of hanger can hold.

Important Note About Plate Hangers

Be sure to use plate hangers that are coated, not bare ware hangers. The coating is a rubbery material designed to prevent scratches on your plates as well as aid in gripping the plate securely. The hangers I’ve linked in this tutorial are coated. Bare wire hangers may scratch up your plates. When placing the plate hanger on the plate, carefully put the hooks in place and try not to scoot it around too much on the plate. Be sure to use the proper size hanger for your plate – too loose and it won’t securely hold the plate – extremely tight will either break your hanger or put unnecessary pressure on your plate.

A note on removing stickers from plates

If you have a stubborn thrift store sticker stuck on your plate, a short soak in some warm soapy water will do the trick. I use a gentle rubber scraper to scraper off the soapy sticker and it comes right off. I’ve heard lemon essential oil works well too but have not personally tried it.

How to hang vintage plates

1. Gather all vintage dishes and lay them out on some paper – I use scrap paper or newspaper.
2. Trace around each plate with a felt tip pen to create an outline.
3. Cut out all the plate shapes from the paper.

4. Arrange the plates on the floor or a table in the shape you want them on the wall. This gives a good visual for how they will look all lined up.

5. Use masking tape to hang all the newspaper outlines on the wall, measuring with a tape measure (or sometimes I just use the width of my hand) to get the spacing right. Once all the outlines are up there step back to double check that it looks correct.
6. Next attach the wire plate hangers to the plates: just hook the top two feet onto the top of the plate, stretch the springs down around the back and hook the bottom two feet onto the bottom of the plate. If the feet aren’t sitting quite right you can take the hanger off and bend the wire feet carefully with pliers.

7. Use a tape measure to measure the distance between the top of my plate and the “V” shape of the wire hanger meant for hanging on the nail and hook. Remember this number.

8. Working with the paper template on the wall, find the center of the plate template, then measure down from the top the same measurement that you got in the previous step. This is where your nail will go. Put a dot or x there with a dark pen.
9. Hammer the picture hanger and nail into the wall on the black dot, going right through the newspaper. Once your hook is in you can tear off the newspaper and you’re left with a perfectly placed hook!

10. You can test your plate on your new hanger, but if you have multiple plates to do on the same wall I recommend not hanging the plates until all the hammering is done! Don’t want any accidents!

Do you love vintage plates too? Tell me below in the comments how you like to display them! I hope you found this little tutorial helpful and thanks so much for reading!

Blessings,
Melissa

This post contains affiliate links for which I may earn a small commission on qualifying purchases. Please click here for more details. I truly appreciate your support!